新闻中心

当前位置: 网站首页 -

What should be paid attention to when operating the knitting machine

Writer:徐州恒辉Source:徐州恒辉编织机械有限公司 Number of visits: Date:2019-11-01
1. Check whether the lubricating oil in the case of the knitting machine is within the specified range, pick up the oil detection rod and lower it to ensure that the oil volume is in the center of the two lines, but do not spray too much lubricating oil outside;
 
2. Check the lubricating oil of the turbine box by the braider, which can be visually inspected by the oil sight glass, and supplement the lubricating oil when it is lower than half of the oil sight glass. (it should not be higher than the oil mirror when replenishing);
 
3. The impeller and axis of the knitting machine shall be lubricated before starting each shift and the table shall be wiped clean to avoid the foreign matters from blocking the running ingot;
 
4. All transmission gear parts of the knitting machine shall be properly lubricated and maintained;
 
5. Proper lubrication and maintenance shall be carried out for the smooth rod part of the optical cable arranging device of the knitting machine;
 
6. Make sure that there is no obstacle within the range of action of the knitting machine;
 
7. Tighten the screws on the transmission part and connecting part of the knitting machine to avoid loosening and affecting the operation of the machine;
 
8. Before the operation of the knitting machine, please run at low speed for about 5 minutes and then increase the speed.

TypeInfo: Latest News

Keywords for the information:

Xuzhou Henghui Braiding Machinery Co., Ltd.-Henghui Braiding Machinery