新闻中心

当前位置: 网站首页 -

Skillful method of checking knitting pitch and angle of knitting machine

Writer:徐州恒辉Source:徐州恒辉编织机械有限公司 Number of visits: Date:2019-09-18
On the braiding machine, the spindle bottom is separated from the upper bearing. The spindle bottom is assembled in the central casing, and is assembled in the spindle foot by elastic elements. On the other hand, the upper bearing and the spindle bottom are connected as a whole through elastic elements.
1. The density of braiding layer does not meet the requirement, because the density of braiding is related to the number of spindles, the number and diameter of each spindle, pitch and weaving angle. The number, number and diameter of spindles remain unchanged. The larger the pitch braiding angle, the lower the density of braiding.
 
Prevention and cure methods: check knitting pitch and knitting angle, adjust in time with consequences, check whether there are roots missing, strands missing and small diameter should be made up or replaced in time, keep the number of spindles, root and diameter knitting pitch and knitting angle in harmony with each other.
 
2. The density of the braiding layer of the knitting machine does not conform to the elasticity of the even strand.
 
Control of tension drop of yarn strand on knitting machine, prevention and cure method: replace elastic spring drop due to temporary application fatigue, adjust tension of each yarn strand
 
3. Uneven knitting pitch of the knitting machine, too few cable coils on the traction wheel cause unstable sliding spindle speed and traction wire speed.
 
Prevention and cure method: properly add the number of circles of cable on the traction wheel and adjust the speed swing between them
 
4. There are holes and scars in the braiding layer of the knitting machine
When the strand is disconnected, the tension control of the strand is not uniform, there are accumulated cross-pressing wires in the take-up, and the arrangement of the strand is not uniform, the tension of the spindle is not adjusted equally, the strand is loose and divergent, and when the strand is broken, the remedial methods are inappropriate: adjusting the tension of the strand and adjusting the tension of the spindle.

TypeInfo: Latest News

Keywords for the information:

Xuzhou Henghui Braiding Machinery Co., Ltd.-Henghui Braiding Machinery