新闻中心

当前位置: 网站首页 -

Maintenance Measures of High Speed Braiding Machine

Writer:徐州恒辉Source:徐州恒辉编织机械有限公司 Number of visits: Date:2019-09-06
Maintenance inspection contents:
1. Check whether the lubricating oil in the chassis is within the prescribed range. Pick up the probe rod and drop it to ensure that the amount of oil is in the center of the two lines, but it can not avoid excessive lubricating oil injection.
 
2. Check the lubricating oil of the turbine box, which can be visually measured by the oil mirror. When it is less than half of the oil mirror, it is necessary to supplement the lubricating oil.
 
3. All transmission gear parts of the machine are lubricated and maintained once a week.
 
4. Lubricate and maintain the light rod parts of the light rod arranger once a week.
 
5. It is necessary to confirm that there is no obstacle in the range of motion of the machine and check it at any time.
 
6. Tighten the screw of the transmission part and the connecting part of the machine so as not to loosen and affect the operation of the machine. Check once a week.
 
7. Before the machine is operated, please run at a low speed for about 5 minutes before increasing the speed.

TypeInfo: Latest News

Keywords for the information:

Xuzhou Henghui Braiding Machinery Co., Ltd.-Henghui Braiding Machinery