新闻中心

当前位置: 网站首页 -

Five points need to be known when installing a high-speed knitting machine

Writer:徐州恒辉Source:徐州恒辉编织机械有限公司 Number of visits: Date:2019-08-31
1. Before installation, the cloth head soaked with gasoline or kerosene will remove protective materials and dirt from the processing surface of the knitting machine, and pay attention not to drop gasoline and kerosene on the painted surface. Then dry it with a clean cloth and coat it with clean oil to prevent rust.
 
2. For anchor bolts on concrete foundation, deep holes must be used. The depth of the foundation depends on the local geological conditions. For concrete upstairs, through holes should be used. The foundation should be firm so as to avoid vibration when the knitting machine works.
3. Wedge iron can be used to adjust during installation and level instrument can be adjusted. For larger size braiding machine with braiding part and traction part as separate base, adjustable pad iron can be used for braiding part foot, adjustable ground foot for traction part and level instrument can be used to adjust.
 
4. Horizontal tolerance of the base is less than 1.0M M/M when the whole machine is installed. Coaxiality tolerance of the track center line of the braiding part of the braiding machine with split base is less than 4mm.
 
5. The braiding machine realizes secondary grouting after correction.

TypeInfo: Latest News

Keywords for the information:

Xuzhou Henghui Braiding Machinery Co., Ltd.-Henghui Braiding Machinery